Fisheye Home > accessories > Seatool UWMT-3W
Seatool UWMT-3W


Housing installation example
This example uses FIX Rotary Hotshoe Base attached to Seatool SR11/12 housing. Full installation would have monitor housing cable connected to connector on back of housing.

*Click image to enlarge.


Specifications
LCD Type Low temperature polysilicon TFT monitor
Aspect Ratio 16:9
Resolution 960 x 240(230,400pixels) *Same level as camera's LCD
Display Colors 16,000,000
Dot Pitch 0.068 x 0.1535(H x V)
Run Time 3-4 hours(AAA alkaline batteries x 4 pc.)
Controls Power ON/OFF, Brightness adjustment, Contrast adjustment
Included Items Base Mount(YS type), hood
*To connect monitor to video camera housing, housing must have function expansion bulkhead connector installed. Contact your authorized Fisheye/Seatool Dealer for guidance on after-service connector installation, or on how to order your housing with function expansion connector pre-installed.

*Above images show development prototype. Actual product may differ partially.

email:info@fisheye-jp.com tel +81-3-5996-5637 / fax +81-3-5996-7202 c2007 fisheye All rights reserved.